News and Events

Dry coolers are widely used in industrial process cooling, HVAC systems, data centers, and other applications where reliable heat rejection is essential. However, as cooling equipment is increasingly installed near commercial buildings, residential areas, and noise-sensitive facilities, acoustic per

A dry cooler can operate efficiently throughout the year, but winter conditions introduce one of the most serious risks in any water-based heat rejection system: freezing.When water or an inadequately protected water-glycol solution freezes inside a dry cooler coil, pipe, valve, or heat exchanger, t

Dry coolers are widely used in data centers, industrial process cooling, energy storage systems, power generation, HVAC systems, and other applications where heat must be rejected to outdoor air without relying heavily on water.However, there is one operating condition that can easily be overlooked

Ambient humidity is often included in cooling-system design data, but its importance can easily be misunderstood when selecting a dry cooler.For a conventional dry cooler operating with a dry coil, ambient dry-bulb temperature is normally much more important than relative humidity. The unit rejects

Selecting a heat exchanger for an industrial refrigeration system requires more than comparing heat exchanger types or nominal cooling capacities.The right solution depends on the heat exchanger duty, refrigerant, cooling or heat-rejection capacity, inlet and outlet temperatures, design pressure, al

Heat exchangers installed near coastlines face a combination of salt-laden air, high humidity, condensation and, in some locations, industrial pollution. Without suitable protection, these conditions can attack fins, tubes, headers, casings, fasteners and electrical components.The most effective way

Selecting a dry cooler for Dubai, Riyadh, Doha or another hot and dusty location is not simply a matter of adding a safety percentage to a catalogue capacity. Extreme dry-bulb temperature reduces the available temperature difference for heat transfer, while airborne sand and dust gradually increase

Choosing between a fixed tubesheet, floating head and U-tube heat exchanger is not simply a matter of comparing purchase prices. The right design depends on where fouling is expected, how the exchanger will be cleaned, how much differential thermal expansion must be accommodated and whether the main

Choosing between a microchannel coil and a fin-and-tube coil is not simply a choice between “new” and “traditional” technology. It affects condenser size, refrigerant charge, fan power, corrosion strategy, maintenance work, replacement logistics, and total ownership cost.For an outdoor condenser, ne